If you own a residence, learning a little about your home’s plumbing will aid you make simple repairs, saving the time and cost commitment you take on when hiring a plumber.
Keep in mind that anything other than a small repair needs the advice and skill of a trained plumber, but a few easy tasks are effortlessly accomplished by the residence do-it-yourself handyman.
The first step in any plumbing task is understanding the components you use. Failing to use the correct variety of pipe can not only injury the line, but also put your residence in violation of local building codes.
Most water lines in homes have rigid copper piping.
This cannot be bent, so it needs soldering at joints and tees. If you have never soldered, do not danger an expensive mishap. Contact a professional to ensure that the job is done correctly. Other pipes used in homes contain flexible copper, plastic PVC, ABS, PEX, and galvanized steel. Go to the hardware store and familiarize yourself with these numerous kinds of pipes before you begin any project in your home.
Leaks are the most typical type of plumbing issue that the average do-it-yourself handyman attempts to fix without professional support.
For faucets that leak, tightening the nut below the hand wheel can usually fix the difficulty.
However, you can injury the valve if you tighten it too much, so proceed slowly.
If your copper pipe is leaking, cut the pipe where the leak occurs, then join it back together utilizing a union. This needs no soldering.
Thinking of Security
If you really feel confident in your soldering ability and attempt to repair copper piping, practice proper security at all times. You should invest in a great pair of safety goggles, and take into account protective clothing to avoid burns on your arms or legs.
Always perform these tasks when an individual else is in the property with you. This ensures somebody is around to seek aid if an accident occurs.
When to Ask for Aid
Any time your plumbing tasks consist of replacing a major component, such as a toilet, water softener, or water heater, you need to call a plumber. Also, if you do not feel comfy with your soldering skills or have no experience with soldering and will need to repair copper pipe, call a specialist.
Attempting a repair that you are not comfy with can cause costly issues.
It’s far far better to hire a professional at the beginning than risk causing injury to your home.